| Stuart Turner pump Monsoon extra standard single 4.5 bar 46326 The Monsoon Extra Standard 4.5 bar Single pump is designed for use in larger domestic and light commercial applications. Installed into an open vented hot or cold water system where all outlets are below the level of the cold water cistern it has the equivalent effect of raising the cold water cistern 37 metres above its current position with a flow rate of 45 litres per minute.
Applications include boosting water pressures to individual outlets where a high pressure boost is required. This pump is not recommended for use in pairs boosting common hot and cold supplies to mixer taps and shower valves (for applications such as this please refer to the Monsoon Extra Universal range). Monsoon Extra is ideal as an outlet pump installed after a shower valve pumping to multiple shower heads.
Technical Specification The Pump
Hot & cold inlet strainers
Stuart hard face mechanical seal
Flow switch sensitivity approx. 1.0 l/min
Max. inlet head 10 metres
Plumbing connection 22 mm push-in
Flexible hose 2 off 22 mm push-in x
300 mm long
Anti vibration feet
WRAS no. 0512134
The Motor
Power supply 230/1/50
Enclosure rating IPX4
Motor induction type Induction type permanent capacitor thermally protected
Power consumption 1060 Watts
Full load 4.9 Amps
Fuse rating 13 Amps
Pre wired
Rating Continuous (S1)
Gross weight (packed) 13.3 Kg
2 Year Guarantee United Kingdom only
Part Number 46326 (United Kingdom specification only)
|
